Manualshelf

User`s guide

ManualsBrandsBull ManualsComputer equipmentNovaScale T860 E1
919293949596979899100
4-30
Using WebBIOS
Starting WebBIOS
1.
Press Esc when a full-screen logo appears after powering on the server.
2. Press Ctrl + H on POST screen to start the WebBIOS.
POST screen image (with no virtual disk assigned)
LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) xxxx LSI Corporation
HA -X (Bus X Dev X) MegaRAID SAS PCI 8708EM2
FW package: X.X.X-XXXX
X Logical Drive(s) found on the host adapter.
X Logical Drive(s) handled by BIOS
Press <Ctrl> <H> for WebBIOS
IMPORTANT:
Do not press unnecessary key such as Pause during POST.
If you fail to press Ctrl + H and the system proceeds without displaying the WebBIOS
main menu (shown on the next page), reboot the system, and press Ctrl + H on the
POST screen.