User`s guide

4-15
Exit
The options on the menu are described below.
Exit Saving Changes
Select this item to terminate SETUP after saving the newly selected information in CMOS (nonvolatile memory).
Selecting "Exit Saving Changes" causes the confirmation screen to appear.
If you select "Yes," SETUP is terminated with the newly selected information saved in CMOS (nonvolatile memory).
The server reboots automatically.
Exit Discarding Changes
Select this item to terminate SETUP without saving the newly selected information in CMOS (nonvolatile memory).
When the confirmation message "Save before exiting?" appears, select "No" to terminate SETUP without storage of the
modified information. The server proceeds to the Boot menu.
If you select "Yes," SETUP is terminated and the modified information is stored. The server reboots automatically.
Load Setup Defaults
Select this item to return all the SETUP values to the default values. Selecting "Load Setup Defaults" causes the
confirmation screen to appear.
Select "Yes" to return the values to the default values.
Select "No" to return to the Exit menu screen.
Load Custom Defaults
Select this item and press Enter to load the custom defaults stored. This menu does not appear if the Custom Defaults
are not saved.
Save Custom Defaults
Select this item and press Enter to save the parameters currently being edited as custom defaults. When the parameters
are saved, the Load Custom Defaults menu appears.
Discard Changes
Select this item to discard the changes you made to the CMOS values.
Save Changes
Select this item to save the newly selected information to the CMOS (non-volatile memory) without closing SETUP.