User`s guide

4-14
Event Log Configuration Submenu
Option Parameter Description Your Setting
System Event Log –
Displays the System Event Log
submenu.
Clear All Event
Logs
–
Press Enter and select "Yes" to clear
the system event log.
[ ]: Factory-set
Boot
The Boot menu is used to set the boot priority.
Indication Device
USB CDROM USB CD-ROM drive
IDE CD ATAPI CD-ROM (including the factory-installed optical disk drive)
USB FDC USB floppy disk drive
USB KEY USB flash memory device
IDE HDD IDE hard disk drives
PCI SCSI
Internal hard disk drives installed in your system (“Software RAID” is
displayed in the RAID configuration.)
PCI BEV
IBA GE Slot xxxx
Onboard LAN.
LAN1: Slot 0C00, LAN2: Slot 0C01
Other indication
Optional PCI board connected to the riser module.
1. When BIOS detects a bootable device, it displays the information on the device in the relevant indication.
To boot the server from a desired device, the device must be registered as a boot device. (Up to eight boot
devices can be registered.)
2. Pressing X after selecting a device allows the selected device to be registered as a boot device or deleted from
the registration.
When eight boot devices are registered, no other boot device can be registered when you press X. To register a
new boot device, first delete the registration of another boot device.
Select e device and press Shift + 1 to enable or disable the selected device.
3. You can change the boot priority (first to eighth) of each device by using ↑, ↓, + and/or –.
To change the priority of a device, move the cursor to the device by using the ↑ or ↓, and press + or –.