User`s guide

4-11
Option Parameter Description Your Setting
Power ON Delay
Time (Sec)
[20] - 255
Specifies the power on delay time
within a range between 0 and 255
seconds. The time specified is valid
when "Power On" or "Last State" is
specified for AC LINK.
Platform Event
Filtering
Disabled
[Enabled]
Enables or disables the platform
event filtering (PEF) feature.
[ ]: Factory-set
IMPORTANT: To power on the server from an UPS (Uninterruptible Power Supply),
select [Server] - [AC LINK] - [Power On].
The table below shows the operation when the AC power to the server is turned off once and then on again, depending
on the "AC LINK” setting.
AC LINK Setting
System status before the AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown* Off Off On
* Keep pressing the power switch for four seconds or longer. This forcibly turns off the power.
System Management Submenu
Option Parameter Description Your Setting
BIOS Version –
Displays the current BIOS version.
(View only)
Board Part Number –
Displays the part number of the
motherboard. (View only)
Board Serial Number –
Displays the serial number of the
motherboard. (View only)
System Part Number –
Displays the system part number.
(View only)
System Serial Number –
Displays the system serial number.
(View only)
Chassis Part Number –
Displays the chassis part number.
(View only)
Chassis Serial Number –
Displays the chassis serial number.
(View only)
Onboard LAN1 MAC
Address
–
Displays the MAC address of the
onboard LAN port 1. (View only)
Onboard LAN2 MAC
Address
–
Displays the MAC address of the
onboard LAN port 2. (View only)
Management LAN MAC
Address
–
Displays the MAC address of the
management LAN port. (View only)
BMC Device ID –
Displays the BMC device ID. (View
only)
BMC Device Revision –
Displays the BMC device revision.
(View only)
BMC Firmware Revision –
Displays the BMC firmware revision.
(View only)
SDR Revision –
Displays the sensor data record
revision.
PIA Revision –
Displays the platform information area
revision. (View only)
[ ]: Factory-set