User`s guide

4-7
PCI Configuration
Option Parameter Description Your Setting
PCI Slot 1-6
Option ROM
[Enabled]
Disabled
Disables or enables the option ROM scan
for the PCI board in the PCI slot.
[ ]: Factory-set
– Onboard Video Controller submenu
Option Parameter Description Your Setting
VGA Controller Disabled
[Enabled]
When Disabled, the BIOS will hold the
embedded chip in reset.
Onboard VGA
Option ROM Scan
[Auto]
Force
Allows to select either the onboard VGA
controller or the optional PCI VGA
controller as the display device that will be
active when the system boots.
The “Force” option is selected to use the
onboard VGA controller when an optional
PCI VGA controller is installed in the
system.
[ ]: Factory-set
– Onboard LAN submenu
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled]
When Disabled, the BIOS will hold the
embedded chip in reset.
LAN1 Option ROM
Scan
Disabled
[Enabled]
When Enabled, initializes the device
expansion ROM.
LAN2 Option ROM
Scan
Disabled
[Enabled]
When Enabled, initializes the device
expansion ROM.
[ ]: Factory-set
Peripheral Configuration
IMPORTANT: Note that the interrupt and/or base I/O address are not overlapped with
others. If the value set for the interrupt or base I/O address is used in another resource, a
yellow asterisk (*) appears. Reset properly any item with a yellow asterisk.
Option Parameter Description Your Setting
Serial Port A Disabled
[Enabled]
Enables or disables the serial port A.
Base I/O
address
[3F8]
2F8
3E8
2E8
Selects the base I/O address for the serial
port A.
Interrupt IRQ 3
[IRQ 4]
Selects the interrupt for the serial port A.
Serial Port B Disabled
[Enabled]
Enables or disables the serial port B.
Base I/O
address
3F8
[2F8]
3E8
2E8
Selects the base I/O address for the serial
port B.
Interrupt [IRQ 3]
IRQ 4
Selects the interrupt for the serial port B.
USB Controller [Enabled]
Disabled
Enables or disables the USB controller.
USB 2.0 Controller Disabled
[Enabled]
Enables or disables the USB 2.0 controller.
Parallel ATA Disabled
[Enabled]
Enables or disables the parallel ATA.
[ ]: Factory-set