User`s guide

4-5
Processor Settings
Option Parameter Description Your Setting
Processor Retest [No]
Yes
If yes, BIOS will clear the historical
processor status and retest the
processor on the next boot.
Processor Speed nnn GHz
Displays the clock speed for the
processor. (View only)
Processor 1 CPUID Numeral
Disabled
Displays the CPU ID for processor, if
present.
"Disabled" indicates that the
processor is defective. (View only)
Processor 1 L2 Cache nnn KB
Displays the L2 cache size for
processor.
Processor 2 CPUID Numeral
Disabled
Displays the CPU ID for processor, if
present.
"Disabled" indicates that the
processor is defective. (View only)
Processor 2 L2 Cache nnn KB
Displays the L2 cache size for the
processor.
Execute Disable Bit [Enabled]
Disabled
Displayed only when the CPU
supports Execute Disable Bit.
Virtualization Technology [Enabled]
Disabled
Enables or disables the Intel(R)
virtualization technology.
C1 Enhanced Mode [Enabled]
Disabled
Enables or disables the C1
Enhanced Mode.
Intel SpeedStep(R)
Technology
[Enabled]
Disabled
Enables or disables the Intel(R)
SpeedStep technology.
[ ]: Factory-set
Advanced
Option Parameter Description Your Setting
Memory Configuration –
Displays the Memory Configuration
submenu.
PCI Configuration –
Displays the PCI Configuration
submenu.
Peripheral Configuration –
Displays the Peripheral
Configuration submenu.
Advanced Chipset Control –
Displays the Advanced Chipset
Control submenu.
Boot-time Diagnostic
Screen
Enabled
[Disabled]
When disabled, the BIOS will
display a full screen logo during
POST. Press Esc to switch to the
POST execution screen.
Reset Configuration Data [No]
Yes
Select "Yes" if you want to clear the
system configuration data during the
next boot. This parameter is
automatically reset to "No" in the
next boot.
NumLock On
[Off]
Defines whether the numeric keypad
is enabled or disabled during boot.
Memory/Processor Error [Boot]
Halt
If "Halt" is selected, the boot stops
when a POST error occurs.
[ ]: Factory-set
IMPORTANT: Be sure to note the boot priority before selecting "Yes" for [Reset
Configuration Data], because the boot device information will be cleared. Select [Exit
Saving Changes] to reboot the system, run the BIOS SETUP utility, and reset the boot
device order.