User`s guide

4-4
Menu and Parameter Descriptions
The SETUP utility includes the following six major menus:
 Main
 Advanced
 Security
 Server
 Boot
 Exit
To set minute functions, select a submenu from the above menus. The following describes available functions and
parameters, as well as the factory-setting for each menu.
Main
Option Parameter Description Your Setting
System Time HH:MM:SS Sets the system time.
System Date MM/DD/YYYY Sets the system date.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
When accessing the internal IDE
device for the first time during
POST, the system waits for the
specified time until the device
becomes ready.
Primary IDE Master/
Primary IDE Slave
Secondary IDE Master/
Secondary IDE Slave
Select submenu
Sets the information on the
device connected to each
channel on the submenu. We
recommend you leave the items
as they are at the shipment.
Processor Settings Select submenu
Shows the processor settings
submenu.
Language [English (US)]
Français (FR)
Deutsch (DE)
Español (SP)
Italiano (IT)
Selects the language in which
the BIOS is displayed.
[ ]: Factory-set
IMPORTANT: Check and adjust the system clock before the operation if any of the
following conditions is applicable.
– After carrying of device
– After storing of device
– After the device has entered into a pause state under the environmental condition
enduring device operation (temperature: 10°C - 35°C, humidity: 20% - 80%)
Check the system clock roughly once per month. When the system clock is installed in a
system requiring high time precision, we recommend using a time server (NTP server).
If the system clock is significantly delayed or advanced in spite of regular adjustments,
contact your service representative to request maintenance.