User`s guide

3-6
CONNECTING PERIPHERAL DEVICES
Connect peripheral devices to the server. The server is provided with connectors for wide variety of peripheral devices
on its front and rear. The figure on the next page illustrates the available peripheral devices for the server in the standard
configuration and the locations of the connectors for the devices.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Do not use any damaged cable connector.
Do not use any unauthorized interface cable.
Do not use the server with any loose interface connection.
Do not step on the interface cable or place any heavy object on it.
IMPORTANT:
 Power off the server and a peripheral device before connecting them. Connecting a
powered peripheral device to the powered server will cause malfunctions and failures
(not applicable to USB devices).
 To connect a third-party peripheral device or interface cable to the server, consult with
your service representative for the compatibility of such a device or cable. Some
third-party devices must not be used with this server.
 Plug in the keyboard and mouse with "Δ" on the connector upward.
 A leased line cannot be connected directly to the serial port connectors.