User`s guide
2-28
Use of the Disc
Keep the following notes in mind to use the disc for the server:
The playback of discs which do not conform to the standards is not guaranteed.
Do not drop the disc.
Do not place anything on the disc or bend the disc.
Do not attach any label onto the disc.
Do not touch the signal side (on which nothing is printed) with your fngers.
Place the disc with its printed side facing up and gently put it on the tray.
Do not scratch the disc or write anything directly on it with a pencil or ball-point pen.
Keep the disc away from cigarette smoke.
Do not leave the disc in a high-temperature place (e.g., place exposed to direct sunlight or close to a heater).
When dust or fingerprints are attached on the disc, wipe the disc from its center to the edges with a dry soft
cloth slowly and gently.
Use the CD cleaner to clean the disc. Do not use record spray/cleaner, benzene, or thinner.
Keep the disc in a disc case when not in use.
If the disc emits a lot of noise in the optical disk drive, remove the disc and insert it back again.