User`s guide

2-25
Optical Disk Drive
The server is provided with an optical disk drive on its front to read/write data from/to a disc.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage.
See pages 1-3 to 1-8 for details.
Do not leave the tray ejected from the optical disk drive.
Take off the headphone before you plug in the headphone jack.
Setting and Removing the Disc
1.
Make sure that the power of the server is on (the POWER/SLEEP lamp is lit in green) before setting the disc
in the optical disk drive.
2. Press the Open/Close button on the front of the optical disk drive.
The tray slides out.
3. Put the disc on the tray carefully and securely with the printed surface facing upward.
4. Press the Open/Close button or gently push on the front of the tray.
The tray slides automatically back into the optical disk drive.
IMPORTANT: If a noisy sound occurs after setting a disc, set it again correctly.
Open/Close button