User`s guide

2-24
Power Off
Follow the procedure below to power off the server. If the power cord of the server is connected to a UPS, refer to the
manual that comes with the UPS or to the manual for the application that controls the UPS.
IMPORTANT: Always allow the POST to complete before turning off the server.
1. Shut down the OS.
2. Press the POWER switch on the front of the server.
The POWER/SLEEP lamp goes out.
3. Power off the peripheral devices.
NOTE: The standby function of Windows Server is not available. Do not select "Standby"
in the Windows shutdown menu.