User`s guide

E-13
DRIVER INSTALLATION AND ADVANCED SETTINGS
This section describes how to install and setup various standard drivers mounted on the device.
For any information on installing and setting up the driver that is not described in this section, please refer to the
document attached to the driver.
PROSet
Using PROSet enables the following items:
 Detailed information of the adapter confirmation.
 Loop back test, packet transmission test diagnosis and so on.
 Teaming setup.
Configuring several network adapters as one team provides the server with a tolerant environment and enhances
throughput between the switches.
PROSet is necessary to use these features.
1. Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive.
2. The [Windows Explorer] dialog starts.
* Procedure using a standard start menu
Click Start menu and click [Windows Explorer].
* Procedure using a classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "dxsetup.exe" in the following directory.
\004\win\winnt\dotnet\dl3\proset\win32
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Click [Next].
7. Select [I accept the terms in the license agreement] and click [Next].
8. Click [Install].
9. When [InstallShield Wizard Completed] window is displayed, click [Finished].
10. Remove the DVD from the Optical Disk Drive, and restart the system.
Network Driver
Specify the details of the network driver.
Two standard network drivers will be installed automatically, but the link speed and duplex mode must be manually
specified.
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box appears.
* Procedure using a standard start menu
1. Click Start menu, click [Control Panel], click [Network Connections], and click [Local Area
Connection].
* Procedure using a classic start menu