User`s guide

E-8
11. Insert Microsoft Windows Server 2003 R2 DISC 2 CD-ROM into the optical disk drive. Confirm the
parameters and click [OK].
12. Once the installation is completed, remove the Microsoft Windows Server 2003 R2 DISC 2 CD-ROM from
the optical disk drive, and restart the system.
Make sure to execute the tasks described in "Driver Installation and Advanced Settings" and "Updating the
System" of manual.
Reinstallation to Multiple Logical Drives
This subsection describes the procedure to reinstall the operating system if the multiple logical drives exist.
Before Re-installing the Operating System
Be sure to make backup copies before re-installing the operating system.
Re-installing the Operating System
1.
Start the clean installation following the procedure described in this manual.
2. Specify the partition in which you want to install the operating system when the following message appears:
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP and DOWN ARROW keys to select an item in the list.
* Cannot modify the drive letter of your system or boot volume. Confirm the proper drive letter is
assigned and then, continue the setup.
3. Continue the clean installation again following the procedure described earlier in this chapter.
The drive letter of the re-installed system may differ from the one of the previous system. If you need to
modify the drive letter, modify it according to the "Procedure for Modifying the Drive Letter".
Modifying the Drive Letter
1.
Click Start menu, right-click [My Computer], and specify [Manage] to start
[Computer Management].
2. Specify the [Disk Management] in the left side of the window.
3. Right-click the volume for which you want to modify the drive letter and specify the [Change Drive Letter
and Path...].
4. Click [Yes].
5. Choose the [Assign a drive letter] and specify the drive letter you want to assign.
6. Click [OK].
7. If the following message appears, click [Yes].
Changing the drive letter of a volume may cause programs to no
longer run. Are you sure you want to change this drive letter?
8. Close the [Computer Management].