User`s guide

E-7
7. Select the proper SCSI Adapter and press Enter.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
Continue performing tasks according to the subsequent messages that appear.
8. When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT: If you install Windows Server 2003 on a hard disk larger than
2,097,152MB(2TB), you can specify only a value equal to or less than 2,097,152MB as
partition size.
9. When the installation of Windows Server 2003 is finished, the system reboots automatically.
– Windows Server 2003 has been installed: Go on the step 14.
– Windows Server 2003 R2 has been installed: Go on the step 11.
10. The [Windows Setup] screen is displayed after logging on to the system.
IMPORTANT:
 In this case, the [Windows setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 according to
the following procedures.
 You can install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 after the
application of "System update".
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2.
In this case, note that the [Windows setup] screen is not displayed.