User`s guide

9-71
9. Push down the lever to secure the CPU.
10. Put the heat sink on CPU.
If you are going to use the water cooling heat sink, see "Water Cooling Heat Sink" described later.
11. Install the components you removed previously.
12. Set [Reset Configuration Data] on the Advanced menu to "Yes".
This setting is required to change the hardware configuration data. See Chapter 4 for details.
13. If the CPUs are additionally installed to configure a multi-processor system, provide the following settings on
Windows.
Select [Device Manager] - [Computer] and check the driver. If the driver is "ACPI single processor PC",
change it to "ACPI multi-processor PC". Restart the server according to the on-screen message, and update
the system. See Chapter 5 for details.