User`s guide

9-69
Installation
Install a CPU as described in the following procedure.
IMPORTANT: CPUs are easily affected by static electricity. Before handling a CPU,
discharge the static electricity of your body by touching a metallic frame section of the
serve. Do not touch the CPU pins with bare hands. In addition, do not put a CPU directly
on a desk. For more details on static electricity, see "Static Precautions".
1. See the section "Preparing for Installation and Removal" described earlier to prepare.
2. Remove the following components:
 Side cover
 CPU duct cover
3. Locate the CPU socket where you are going to install theCPU.
4. Remove the CPU cover.
5. Raise the locking lever on the socket.
IMPORTANT: Open the lever until it stops. The bar can be opened to 120 degrees or
more.