User`s guide

9-64
Slots to install the PCI board
PCIe
#6
PCIe #5 PCIe #4
PCIe
#3
PCI #2
PCI-X
#1
Note
PCI slot capability
x4
lane
x8 lane x4 lane x8 lane
32 bit/
33MHz
64 bit/
133MHz
Slot size Short Full-height
PCI board type x8 socket 5V 3.3V
Available board
size
140
mm
max.
Long / Short
SCSI controller
(64-bit/66 MHz PCI)
–
– – –
√ √
Cannot connect with internal hard disk drive.
SCSI
CONTROLLER
SCSI controller
(64-bit/133 MHz
PCI-X)
– – – –
√ √
Cannot connect with internal hard disk drive.
Cannot be used together with SCSI
CONTROLLER (PCIE).
SCSI
CONTROLLER
(PCIE)
SCSI controller
(PCI EXPRESS
(x1))
– –
√ √
– –
Cannot connect with internal hard disk drive.
Cannot be used together with SCSI
CONTROLLER.
SAS CONTROLLER
– –
√ √
– –
2 max.
– Internal RAID
controller
z
– – – – –
Factory-installed
RAID
CONTROLLER
(128MB, SAS/SATA
HW RAID0/1/5/6)
RAID controller
(SAS/SATA)
– – – – – –
RAID BATTERY
BACKUP UNIT
Additional battery
– – – – – –
To be installed in RAID CONTROLLER (128 MB,
SAS/SATA HW RAID0/1/5/6)
100BASE-TX
ADAPTER
100BASE-TX
adapter
(32-bit/33 MHz PCI)
– – – –
√ √
2 max.
1000BASE-T 1000BASE-T
adapter
(64-bit/133 MHz
PCI-X)
– – – –
√ √
1 max. per PCI bus (2 max. per PCI bus with
AFT)
1000BASE-T(2CH): 2 max. per system
Cannot co-exist with 1000BASE-SX.
1000BASE-T 1000BASE-T
adapter
(PCI EXPRESS
(x1))
–
√ √ √
– –
1 max.
Teaming with any other NIC is unavailable.
1000BASE-T(2CH) 1000BASE-T
adapter (2 ch)
(64-bit/133 MHz
PCI-X)
– – – –
√ √
1000BASE-T(2CH) 1000BASE-T
adapter (2ch)
(PCI EXPRESS
(x4))
–
√ √ √
– –
2 max. together with 1000BASE-T(4CH))
Teaming (equivalent to AFT/ALB) with any other
NIC is unavailable.
10BASE-T is not supported.
1000BASE-T(4CH) 1000BASE-T
adapter (4ch)
(PCI EXPRESS
(x4))
–
√ √ √
– –
2 max. together with 1000BASE-T(2CH))
Teaming (equivalent to AFT/ALB) with any other
NIC is unavailable.
10BASE-T is not supported.
1000BASE-SX 1000BASE-SX
adapter (2ch)
(64-bit/133 MHz
PCI-X)
– – – –
√ √
1 max. per PCI bus (2 max. per PCI bus with
AFT)
Cannot co-exist with
1000BASE-T/1000BASE-T(2CH).
10GBEA 10GBASE-SR
adapter
(PCI EXPRESS
(x8))
– –
√ √
– –
1 max.
z: Factory-installed, √: Available, –: Unavailable
The system searches for the PCI board in the following order:
PCI #6 (Standard RAID Controller) → PCI #3 → PCI #1 → PCI #5 → PCI #4 →PCI #2
Set "Disabled" for the Option ROM Scan of the PCI slot connected with non-bootable device by using BIOS SETUP
utility. Disabling Option ROM Scan saves memory consumption and time for startup.
NOTE: The following message may be displayed on POST if many PCI boards are
installed.
ERROR
Expansion ROM not initialized – PCI Mass Storage Controller in slot xx (xx: slot
number)
Change setting in [Advanced] → [PCI Configuration] of the BIOS SETUP.