User`s guide

9-63
PCI Board
The server contains five slots into which PCI boards can be inserted.
IMPORTANT: PCI boards are easily affected by static electricity. Before handling a PCI
board, discharge the static electricity of your body by touching a metallic frame section of
the server. Do not touch terminals and components on the PCI board with bare hands. In
addition, do not put the PCI board directly on a desk. For details on static electricity, see
"Static Precautions" in this chapter.
Installation
Install a board connected to a PCI board slot as described in the following procedure.
IMPORTANT:
 When installing several PCI boards in PCI slots, the SCSI cable should not pass
between PCI boards. If the cable touches the IC and elements on the PCI board, the PCI
board or the cable may be damaged.
 Depending on the type of board, you may have to remove the connector cap from the
adjacent slot or SCSI connector for external devices before installing the board.
 3.3 V or universal PCI board can be installed in PCI board slots #1.
 5 V or universal PCI board can be installed in PCI board slot #2.
NOTE: When installing a PCI board, make sure that the PCI board connector matches the
connector on the motherboard.
PCI board slot #5
PCI EXPRESS (x8)
PCI board slot #4
PCI EXPRESS (x4)
PCI board slot #3
PCI EXPRESS (x8)
PCI board slot #2
32-bit/33MHz
PCI board slot #1
64-bit/133MHz
PCI board slot #6
for factory-installed
Internal RAID
controller