User`s guide

9-52
7. Remove the dummy connector covers from the SAS/SATA connectors on rear of the 2.5-inch HDD cage.
8. Connect the power cable, SAS/SATA cables, and SGPIO cable to the rear of the 2.5-inch HDD cage.
SAS/SATA cable
Connect the SAS/SATA cable from the farthest connector on the rear of the 2.5-inch HDD cage to the
connector on the optional RAID controller. Connect the other SAS/SATA cable from the nearest
connector to the connector on the other optional RAID controller.
SGPIO cable
Connect the SGPIO cable to the SGPIO2 connector on the motherboard.
9. Install the components having been removed.
Removal
To remove the HDD cage, follow the installation procedure in the reverse order.
Power connectors
SAS/SATA connectors
SGPIO connector