User`s guide

9-38
5. Insert the HDD cage to the corresponding slot.
6. Connect the proper cables to the connectors on the rear of the HDD cage.
Connect the power cables (P8 and P9) of the server to the corresponding power connectors on the rear of the
HDD cage. Connect one end of the SAS/SATA cable to the SAS/SATA connector on the rear of the HDD cage
and the other end to the second SAS/SATA connector on the RAID controller. Connect one end of SGPIO
cable to the SGPIO connector on the rear of HDD cage and the other end to the SGPIO2 connector on
motherboard.
Power cable
SAS/SATA cable
SGPIO cable