User`s guide

9-30
11. Move the jumper pin located below the connector for Option B. Connect the three cooling fan cables (for
Options A and Option B) to the connectors on motherboard.
Take care to connect the cable to the proper connector. Otherwise, NEC ESMPRO will fail to monitor the
server.
12. Reassemble the removed components.
Jumper pin for Option A
(front fan)
(JFAN7 connector)
Jumper pin for Option B
(PCI / HDD cage fan)
(JFAN4 connector)
Motherboard
Move the jumper pin to left to enable the redundant fan.
Jumper pin for Option A (rear fan)
(JFAN1 connector)