User`s guide

8-27
MAINTENANCE TOOLS
The Maintenance Tools are used preventively, to maintain and to analyze potential troubles.
Starting the Maintenance Tools
Start the Maintenance Tools as described in the following procedure.
1. Turn on first the peripheral devices and then the server.
2. Insert the EXPRESSBUILDER DVD supplied with your server into the optical disk drive of your server.
3. Press Ctrl, Alt, and Delete to reboot the server from the EXPRESSBUILDER. (You may also turn off and
then on again to reboot the server.)
The system boots up displaying the Boot Selection menu.
IMPORTANT: The initial selection of the menu is "Os installation". "Os installation"
starts automatically after the Boot Selection menu is displayed.
4. When a local console is used, "Maintenance Tools (Normal mode)" is selected.
When a remote console is used, "Maintenance Tools (Redirection mode)" is selected.
IMPORTANT: The initial selection of the menu is "Japanese". "Japanese" starts
automatically when no operation is performed during the five seconds following the
on-screen display of the Language Selection menu.