User`s guide

8-18
The system displays the message below and fails to log on.
Windows Product Activation
This copy of Windows must be activated with Microsoft before you can
continue. You cannot log on until you activate Windows.
To shut down the computer, click Cancel.
YES NO Cancel
→ In Windows Server 2003, the above message will be displayed if you use the operating system without
executing the license authentication. Select "Yes", and execute the procedure for license
authentication.
The operating system cannot be installed correctly.
 Did you check the notes on the operating system installation?
→ See Chapter 6.
During installation, the following warning is registered in the System Log of the EventViewer:
Error detected on the device \Device\CdRom0 during the paging
operation.
→ This is not an issue.
Fail to start the OS:
 Is the EXPRESSBUILDER DVD in the optical disk drive?
→ Take out the EXPRESSBUILDER DVD and restart the server.
 Is the OS functional?
→ Use the recovery process to recover the system.
The OS presents unstable operation:
 Did you update the system?
→ Installing a network drive after installation of the OS may cause unstable operation. Use the
EXPRESSBUILDER DVD to update the system. (See Chapter 6.)
The system does not restart automatically when a stop error occurs, even though the system is set up to do so:
→ In this case, restart it manually.