User`s guide

6-9
8. Specify the installation medium and the Windows system partition.
The [Specify medium / Partitions] step is displayed. Confirm the parameters, modify if necessary, and click
[Next].
IMPORTANT:
 About the partition size
– Specify a partition size larger than the required minimum size for the OS
installation.
– Do not specify a larger partition size than the capacity of the connected hard disk
drive.
 If you select "Create a new partition" at "Windows system drive settings", the contents
of the hard disk will be deleted.
 If "Use existing partitions" is selected, the EXPRESSBUILDER installs the Operating
System to the 1st partition (the 1st partition contents are deleted). The data in the other
partition is kept if the system has two or more partitions. (See the figure below.)
First
Partition
Deleted
Second
Partition
Retained
Third
Partition
Retained
 You cannot re-install the system with an existing partition that is upgraded to Dynamic
Disk remained. Do not select "Use existing partitions" at the "Windows system drive
settings".