User`s guide

5-24
Windows Dr. Watson
Windows Dr. Watson is a debugger for application errors. If any application error is detected, Dr. Watson diagnoses the
server and logs the diagnostic information (log). Follow the procedure below to instruct Dr. Watson to collect diagnostic
information.
1. Click [Run] on Start menu.
2. Type "drwtsn32.exe" in the [Open] box, and click [OK].
The [Dr. Watson for Windows] dialog box appears.
3. Specify the location in which to store the diagnostic information in the [Log File Path] box.
The diagnostic information will be stored with the file name "DRWTSN32.LOG".
NOTE: You can not specify a network path. Specify a path on a local computer.
4. Specify the location of the crash dump file in the [Crash Dump] box.
NOTE: "Crash Dump File" is a binary file that can be read with Windows Debugger.
5. Check the following check boxes on the [Option] box.
 Dump Symbol Table
 Dump All Thread Contexts
 Add To Existing Log File
 Create Crash Dump File
For more information on each of the above functions, refer to Online Help.
6. Click [OK].