User`s guide

5-16
Installing and Setting the Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
Using PROSet enables the following items:
 Detailed information of the adapter confirmation.
 Loop back test, packet transmission test diagnosis and so on.
 Teaming setup.
Configuring several network adapters as one team provides the server with a tolerant environment and enhances
throughput between the switches.
PROSet is necessary to use these features.
NOTE: All of the operation that related to Intel® PROSet must be executed with
administrator privileges. Operation by [Remote Desktop Connection] is prohibited.
If you make no changes to the parameters, click the [Cancel] button to close the dialog.
Clicking the [OK] button will cause a temporary loss of network connectivity.
Follow the procedure below to install PROSet.
1. Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive.
2. The [Windows Explorer] dialog starts.
* Procedure using a standard start menu
Click Start menu and click [Windows Explorer].
* Procedure using a classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "dxsetup.exe" in the following directory.
\001\win\winnt\dotnet\dl3\proset\win32
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Click [Next].
7. Select [I accept the terms in the license agreement] and click [Next].
8. Click [Install].
9. When [InstallShield Wizard Completed] window is displayed, click [Finished].
10. Remove the DVD from the Optical Disk Drive, and restart the system.