User`s guide

5-14
14. Save the parameters.
The [Save parameters] step is displayed.
If you want to save the parameters , set the free formatted floppy disk.
Select [Save parameters], enter the file path of the parameters files into the text box and click [Next].
Otherwise, select [Do not save parameters].
15. The Express Setup will start when you click [Perform] in the [Start Express setup] step.
16. Copy the optional Mass Storage Driver module.
If you install an optional Mass Storage Driver, the message will be shown.
Insert the CD-ROM or floppy disk attached to the Mass Storage Driver and follow the on-screen messages.
17. Remove the EXPRESSBUILDER DVD from the CD-RW/DVD-ROM drive when prompted to do so.
If you proceed with the setup by using the setup parameters file, remove the floppy disk from the floppy disk
drive.
Insert the Windows Server 2003 CD-ROM into the CD-RW/DVD-ROM drive.
The [Agree Software License Agreement] screen appears.