Manualshelf

User`s guide

ManualsBrandsBull ManualsComputer equipmentNovaScale T860 E1
141142143144145146147148149150
5-10
7. Enter the virtual disk settings.
The [Enter RAID settings] step is displayed. Confirm the parameters, modify if necessary, and then click
[Next].
IMPORTANT: Be sure to perform a Consistency Check for the RAID drives configured
by Express Setup.
NOTES:
You can use only physical devices that have an identical model number to configure a
logical drive.
If the process does not finish normally, it may be because the driver is not available in
the EXPRESSBUILDER. See "Optional Board Supported by the
EXPRESSBUILDER" described earlier in this chapter.
8. Specify the installation medium and the Windows system partition.
The [Setting medium / Partitions] step is displayed. Confirm the parameters, modify if necessary, and click
[Next].