User`s guide

5-2
About Express Setup
"Express Setup" helps you install the Windows Operating System. The setup automatically configures the RAID system
and installs the Operating System and some management software.
IMPORTANT: Executing the Express Setup erases all data on the hard disk drive.
You can also use the "Parameters File" during "Express Setup" in order to save or backup the installation parameters.
If you want to set up the server using parameters defined previously, execute the Express Setup using an existing
parameters file.
NOTES:
 If you want to create a parameters file, have a blank floppy disk (MS-DOS 1.44MB
format) ready.
 When using a floppy disk, a USB floppy disk drive is required.
 If you want to use the drivers located on the "OEM-Disk for Mass Storage Device"
that ships with optional boards, a parameters file is mandatory.
 You can create a parameters file in advance using the "Parameter File Creator"
included in the EXPRESSBUILDER.