User`s guide

4-66
CONFIGURING THE MOTHERBOARD JUMPERS
With the pre-installed SETUP utility, you can set passwords to protect the data stored in the server against access from
unauthorized users. If you forget the passwords, however, you will want clear them. The following describes how to
clear these passwords. You can also use the following procedure to clear the CMOS data in the server.
IMPORTANT:
 Clearing the CMOS data resumes the factory-set configuration data.
 Do not change any other switch settings. Any change may cause the server to fail or
malfunction.
Motherboard
Pin for protecting/
clearing the CMOS
data (JBAT)
Pin for protecting/
clearing the
password (J7)
Jumper strap
Protect Protect
Clear Clear