User`s guide

4-51
9. Make sure that both DG0 and DG1 are defined as VD 0, and click [Next].
10. On the "Preview" screen, make sure that the VD is defined correctly, and click [Accept].
11. The confirmation message "Save this Configuration?" appears. Click "Yes" to save the configuration.
12. The confirmation message "All data on the new Virtual Disks will be lost. Want to Initialize?" appears.
Normally, select "Yes".
13. "Virtual Disks" operation screen is displayed. If no other operation is required, click [Home] at the lower left
of the screen.
14. The WebBIOS Top Menu is displayed. Virtual Disk you have created is displayed in the lower right frame of
the screen.