User`s guide

4-46
As an example, define a RAID5 VD of yyyyy MB.
1. Specify the necessary parameters in the left column.
2. Enter "yyyyy" in the "Select Size" field.
3. Click [Accept].
4. If you want to define another VD, click [Back] and repeat the steps starting from the Span Definition screen.
5. When the VD definition is completed, click [Next].
IMPORTANT:
 The value shown in "Select Size" indicates the maximum size allowed for RAID1 or
RAID6. You need to specify the maximum size for RAID0 or RAID5 according to
"Next LD, Possible RAID Levels".
 To use RAID 5 or RAID 6, you need to install the optional RAID Upgrade Kit.
 If no optional RAID Upgrade Kit is installed, do not select the "RAID5" option that
may appear in the [RAID Level] box. If you select it, you will fail to save the
configuration information, and you will need to define a VD again from the start.