User`s guide

4-44
5. The Span Definition screen is displayed.
6. Select a DG to define VD from "Array With Free Space" frame, then click [Add to SPAN]. The DG is defined
in the "Span" field to the right.
7. After the Span has been defined, click [Next] at the lower right of the screen.
IMPORTANT:
 To configure RAID0, 1, 5, or 6, perform the Span Definition to a single DG only. If you
need to perform a Span Definition to several DGs, define the VD for the first DG, then
select the next DG to define VD.
 Span Definition cannot be performed to DGs containing a different number of HDDs.