User`s guide

4-35
Scan Devices
When you click [Scan Devices] on the WebBIOS Top Menu, the HDDs connected are detected again. Use this feature if
you have installed a new HDD while the WebBIOS was running.
IMPORTANT:
 If the newly connected HDD contains another configuration information, the [Foreign
Configuration] screen shown below appears. To use the HDD as new one, click [Clear]
to clear the configuration information in HDD.
 If you use the Universal RAID Utility to configure a RAID system using the newly
connected HDD containing another configuration information, first clear the other
configuration information using the Scan Devices feature.
(*) Universal RAID Utility does not include this feature.