User`s guide

4-33
The detailed settings are continued to the next page. Click [Next] to view more information.
Default settings and their explanation
Item Default Description Change
Battery Backup Present
None
Displays Properties.
• When battery is installed: Present
• When battery is not installed: None
–
Set Factory Defaults [No]
Yes
Restores the vendor's factory defaults. Prohibited *1
Cluster Mode Disabled – Prohibited
Rebuild Rate 30 Recommended value: 30 Permitted
Patrol Read Rate 30 Recommended value: 30 Permitted
BGI Rate 30 Recommended value: 30 Permitted
CC Rate 30 Recommended value: 30 Permitted
Reconstruction Rate 30 Recommended value: 30 Permitted
Adapter BIOS [Enabled]
Disabled
– Prohibited
Coercion Mode [None]
128MB-way
1GB-way
– Prohibited
PDF Interval 300 – Prohibited
Alarm Control [Disabled]
Enabled
Silence
Disabled: Does not issue an alarm. Prohibited *2
Cache Flush
Interval
4 – Prohibited
Spinup Drive Count 2 – Prohibited
Spinup Delay 12 – Prohibited
StopOnError [Disabled]
Enabled
– Prohibited
Stop CC On Error [No]
Yes
Specify the operation if an error is
detected during the Consistency Check.
No: Recover and resume.
Yes: Abort
Permitted
Maintain PD Fail
History
[Disabled]
Enabled
– Prohibited
Schedule CC Supported Set the scheduled consistency check. Permitted
*1 Do not perform "Set Factory Defaults". It changes the factory-set values which can no longer be restored
afterwards.