Installation guide

User Guide
47
www.bull.com
5. Click Have Disk....
6. Select the path to the folder in which the driver is stored (e.g. your storage
media storing the Driver Set) and click Open.
7. On the Install From Disk screen, click OK.
8. Back to the Select the device driver you want to install for this hardware
screen, click Next.
The driver installation starts.
9. Click Close, and restart the computer if prompted to do so.
The driver update is complete.
Installing a SCSI Controller
Adaptec SCSI Card 29160LP
You do not need to install the driver manually, it is automatically installed by Windows
Plud-and-Play.
Installing a Fibre Channel controller
Emulex LightPulse® LPe1150 , Emulex LightPulse® LPe11002
You do not need to install the driver manually, it is automatically installed by Windows
Plud-and-Play.