Installation guide

User Guide
42
www.bull.com
Graphic Accelerator Driver
To upgrade from Microsoft
®
Windows Server
®
2003 to Microsoft
®
Windows Server
®
2008 on a server in use, you must first uninstall the graphics
accelerator driver.
To uninstall the driver:
1. Navigate to Control Panel, and in Programs click uninstall a Program.
2. Select Matrox Graphics Software (remove only) from the program list, and click
Uninstall/Change.
3. Follow the on-screen messages to uninstall the driver.
4. Restart the system.
PROSet
To upgrade from Microsoft
®
Windows Server
®
2003 to Microsoft
®
Windows Server
®
2008 on a server with PROSet installed, you must first uninstall
PROSet.
To uninstall PROSet:
1. Remove the network adapters team.
First note down the current settings (e.g. IP addresses) of the standard and
optional adapters teamed for network redundancy. You will have to reconfigure
the team settings after the upgrade.
To remove the team, see “Adapter Fault Tolerance (AFT)/ Adaptive Load
Balancing (ALB) ” on page 26.
2. Navigate to Control Panel, in Programs click Uninstall a program.
3. Select Intel (R) PRO Network Connections xx.xx.xx.xx from the program list, and
click
Uninstall/Change.
*xx.xx.xx.xx is a version of PROSet and varies depending on servers.
4. Click Remove, click Yes, then click Finish.
5. Follow the on-screen messages to uninstall PROSet.
6. Restart the system.