Manualshelf

Installation guide

ManualsBrandsBull ManualsComputer equipmentNovaScale T860 E1
21222324252627282930
User Guide
28
www.bull.com
Network Driver
Changing a link speed
Follow the steps below to set a link speed and duplex mode. To set an IP address, make
sure that the Internet Protocol Version (TCP/IP) box is checked.
1. Open Control Panel. Under System and Maintenance, click Open Device
Manager
to start Device Manager.
2. Open Network adapters, and double-click Intel(R)~.
3. Click Link Speed, and set the same values for Speed and Duplex as those for the
switching hubs.
4. In the Property dialog box, click OK.
SCSI Controller
Adaptec SCSI Card 29320ALP
Adaptec SCSI Card 29160LP
Adaptec SCSI card 29320LPE
You do not need to install the driver manually, it is automatically installed by Windows
Plud-and-Play.
Disk Array Controller
LSI Logic MegaRAID SAS 8480E
You do not need to install the driver manually, it is automatically installed by Windows
Plug-and-Play.
Fibre Channel Controller
Emulex LightPulse® LPe1150
Emulex LightPulse® LPe11002
You do not need to install the driver manually, it is automatically installed by Windows
Plud-and-Play.