Installation guide

User Guide
25
www.bull.com
For a server running a Server Core installation
1. Note down the current settings (e.g. IP addresses) of the standard and optional
adapters teamed for network redundancy before uninstalling LAN driver.
Configure the settings after reinstalling the LAN driver.
2. At a command prompt, run DxSetup.EXE available on the ExpressBuilder at
the following path:
■ Microsoft
®
Windows Server
®
2008 64-bit (x64) Editions:
\00x\W2K8\drivers\driverset\winnt\ws2008x64\dl5\apps\prosetdx\vistax
64\DxSetup.exe
■ Microsoft
®
Windows Server
®
2008 32-bit (x86) Editions:
\00x\W2K8\drivers\driverset\winnt\ws2008x64\dl5\apps\prosetdx\vista3
2\DxSetup.exe
3. In Intel(R) Network Connections - InstallShield Wizard, click Next.
4. Select Remove, and click Next.
5. Click Remove.
Removal starts automatically.
6. When InstallShield Wizard Completed appears, click Finish.
Restart the system.
Optional Network Boards
The following optional network boards are available for the BULL NovaScale/T850
E1, T860 E1, R440 E1, R460 E1 and R480 E1.
■ Intel® Pro/1000 PT Server Adapter, see “Using the Intel® Pro/1000 PT Server
Adapter after a System Update”, page 24.
■ For BULL NovaScale/T860 E1,T850 E1:
[Intel® Pro/1000 MF Server Adapter/ Intel® Pro/1000 MT Server Adapter/ Intel®
Pro/1000 GT Server Adapter/ Intel® Pro/1000 PT Server Adapter]
■ For BULL NovaScale/R440 E1, R460 E1:
[Intel® Pro/1000 MT Server Adapter/ Intel® Pro/1000 GT Server Adapter/ Intel®
Pro/1000 PT Server Adapter/ Intel® Pro/1000 PT Server Adapter]