Installation guide

User Guide

www.bull.com

9. Read the license terms carefully. If you agree, check I accept the license terms,

and click Next.

10. Click Custom (Advanced). The Upgrade installation is not available at this

time.

11. The "Where do you want to install Windows?" screen is displayed.

If you are using the LSI Logic MegaRAID SAS 8708EM2 RAID Controller,

go to step 12. If not, go to step 13.

12. Insert the ExpressBuilder disc, click Load Driver, Browse the disc to display

the following paths, and click OK.

■ Microsoft

Windows Server

2008 64-bits (x64) Editions:

\00x\W2K8\DRIVERS\DRIVERSET\winnt\oemfd\ws2008x64\fd1

■ Microsoft

Windows Server

2008 32-bits (x86):

\00x\W2K8\DRIVERS\DRIVERSET\winnt\oemfd\ws2008\fd1

Note: in \00x\, x is a variable.

13. Select the disk where the installation partition will be created, and click Drive

options (advanced).

Note: If the partition is already created, go to step 16.

14. Click New, enter a partition size, and click Apply.

15. Select the partition created in step 14, and click Format.

16. Select the partition created, and click Next.

The installation starts automatically.

Note: Please wait until the installation is complete, do not

shutdown or press any key on your system. The system may

automatically reboot several times during the process.