User`s guide

User Guide
77
www.bull.com
If some of the parts listed above are missing or if the hardware is damaged, notify your
server representative.
Additional Parts for Future Use
Before You Begin
Before you begin, please review the following cautions, warnings, and general
guidelines.
Warning
Be sure that power to the system is turned off and unplugged.
All voltage is removed only when the power cords are
unplugged.
■ Avoid excessive vibration and shock. Dropping an electronic component can cause
serious damage.
■ Do not disconnect or remove parts other than those specified in the procedure.
■ Do not touch I/O connector pins.
2 Caged nuts, to be used with
the screws ("Figure 23: M5x16
screws" ) and washers ("Figure
24: Washers") to fix the filler
to the mounting rails
Figure 25: Caged nuts
8 (minimum) screws (TCB
M5)
Figure 26: Screws
8 (minimum) washers
Figure 27: Washers