User`s guide

User Guide
272
www.bull.com
Mass Storage Submenu
AHCI Mode Enabled
Disabled
Unavailable if the SATA mode
is “Legacy” or if RAID Mode is
selected.
If AHCI is enabled, no
information for HDD will be
displayed because the BIOS
does not identify any drives
when AHCI is enabled.
The identification and
configuration is left to the AHCI
Option ROM. No HDD
information in displayed in the
BIOS Setup.
Configure SATA as RAID Enabled
Disabled
Unavailable when AHCI mode
is enabled. This mode can be
selected only when the SATA
controller is in Enhanced Mode.
Staggard Spin Up Support Enabled
Disabled
Available only when AHCI
Mode is enabled
Primary IDE Master Information only.
Primary IDE Slave Information only.
SATA 0 Information only.
SATA 1 Information only.
SATA 2 Information only.
SATA 3 Information only.
SATA 4 Information only.
SATA 5 Information only.
Table 29: Mass Storage Submenu
Feature Choices or
Display Only
Description Your Setting
SAS Controller Enabled
Disabled
Enable or disable the SAS
controller
Table 28: ATA Controller Submenu (Continued)
Feature Choices or
Display Only
Description Your Setting