User`s guide

User Guide
210
www.bull.com
Installing Windows Server 2003
This section describes how to setup the system using Express Setup.
1. Turn on your system.
2. Insert the ExpressBuilder DVD in your optical disc drive.
3. Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and
turn it on again.
4. When prompted, select the language of your choice, and click OK.
Note : At this step, the choosen language is set up for
installation menus only. The language of Microsoft Windows
Server 2003 is linked to the version you are going to install on
your computer.
5. Click on Setup Windows.
6. In the ExpressSetup assistant window, select the following options:
■ Operating system to install.
■ System partition to create, if you need to create one.
■ Display settings.
■ Network identification, if needed.
■ Network options, if needed.
■ User information.
■ Country settings.
■ Computer’s role.
7. Click START Installation, and click OK.
8. When prompted to read the Licence agreement, do so, and click Ye s.
9. When prompted to insert the Microsoft Windows Server 2003 CD-ROM, insert
it, and click OK.
10. When prompted to do so, click on Ctrl + Alt + Del to logon.
11. Log on using Administrator as User name, without any password.
12. Follow the on-screen instructions provided by the operating system to
complete the Windows Server 2003 installation.
13. See “Updating the System”, page 211.
The installation is completed.