User`s guide

User Guide
203
www.bull.com
When the SCSI ID scan completes, the screen listing SCSI IDs and associated devices
appears.
With this screen you can determine the SCSI IDs of the installed options. You can also
view the device information by selecting a device and pressing Enter.
The following submenu appears.
The following table lists submenu items and descriptions.:
Exiting Adaptec SCSI Utility
To exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit (if you
changed any settings, you are prompted to save the changes before you exit).
SCSI ID#4: xxxxxxxxx
Firmware: xxxx xxx
Capacity: xxGB
Format
Verify Disk Me-
dia
Table 12: Submenu Items
Submenu item Description
Format Formats the selected device.
Verify Disk Media Verifies all the sectors in the selected device. If one or more bad
sectors are found, the sectors are remapped.
Scanning SCSI ID : 0 LUN Number : 0
Select SCSI Disk and press <Enter>
SCSI ID #0 : No device
SCSI ID #1 : No device
SCSI ID #2 : No device
SCSI ID #3 : No device
SCSI ID #4 : No device
SCSI ID #5 : No device
SCSI ID #6 : No device
SCSI ID #7 : Adaptec AIC-7901
SCSI ID #8 : No device
SCSI ID #9 : No device
SCSI ID #10 : No device
SCSI ID #11 : No device
SCSI ID #12 : No device
SCSI ID #13 : No device
SCSI ID #14 : No device
SCSI ID #15 : No device
Adaptec 29320ALP