User`s guide

User Guide
183
www.bull.com
Cabling SCSI Devices
Cabling a SCSI Hard Disk Drive
All storage devices require power and DATA cable connections. Devices shipped with
the system are already connected.
The following procedures explain how to attach the cables to a hard disk drive.
SCSI Hard Disk Drive
All storage devices require power and SCSI cable connections. Devices shipped with
the system are already connected.
The following procedure explains how to attach the cables to a hard disk drive.
1. Connect one of the relevant SCSI cable connectors (A) to the matching pins on
the storage device.
- Take care to prevent bending drive connector pins.
- Align the cable connector to the matching pins on the drive.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable (B) to the power connector on the storage
device.
Figure 99: Cabling a SCSI Hard Disk Drive
A - SCSI cable
B - Power cable