User`s guide

User Guide
178
www.bull.com
2. Remove the front panel. See “Removing the Front Panel” on page 142.
3. Open the back panel PCI Add-in Card Retention Device by pressing open from
the inside of the chassis.
Figure 93: Opening the PCI Add-in Card Retention Device
4. Disconnect any cables that may be attached to the PCI add-in board that needs
to be removed.
5. Firmly grab the PCI add-in board by its top edge or upper corners and remove
it from the expansion slot on the server board (A).
Place the removed add-in board in an anti-static protective wrapper.
6. Close the back panel PCI Add-in Card Retention Device (B).
Figure 94: Removing the PCI Add-in Board
TP01725
TP01724
B
A
B