User`s guide

User Guide
170
www.bull.com
16. Reinstall and reconnect any parts you removed or disconnected to reach the
processor sockets.
17. Lower the large processor air duct (labeled “Part A) into the chassis and line it
up with the two mounting holes in chassis. Secure the large processor air duct
to the chassis with two mounting screws.
Figure 88: Installing Large Processor (Part A) Air Duct
Warning
DO NOT operate the server chassis without the processor air
duct in place. The processor air duct is required for proper air-
flow within the chassis.
18. Replace the front panel. See “Replacing the Front Panel” on page 143.
19. Replace the left side cover. See “Replacing the Left Side Cover” on page 141.
TP01137