User`s guide
User Guide
150
www.bull.com
4. Remove any PCI add-in boards that use the PCI card guide. For instructions,
see “Removing an Expansion Card” on page 177.
5. Remove the PCI card guide by pressing in on the blue tabs (A) and pulling the
PCI card guide outward (B).
Figure 54: Removing PCI Card Guide
6. Route the required power cables (connectors P8-P13) from behind the PCI card
guide through the cable routing area at the bottom of the fixed drive cage.
Figure 55: Routing Hard Drive Power Cables
TP01732
A
B
AF000317