User`s guide

User Guide
146
www.bull.com
10. Replace the front panel. See “Replacing the Front Panel” on page 143.
11. Replace the left side cover. See “Replacing the Left Side Cover” on page 141.
Note: If necessary, modify the BIOS Setup program to
recognise the additional device. For additional information, refer
to “BIOS Setup Utility” on page 263.
Removing a 5.25-inch Drive
1. Remove the left side cover. See “Removing the Left Side Cover” on page 140.
2. Remove the front panel. See “Removing the Front Panel” on page 142.
3. Disconnect the power and data cables from the rear of the optical disc drive
(A).
4. Move the latch to the “unlock” position (B).
5. Slide the optical disc drive out of the device drive bay (C).
Figure 50: Removing an Optical Disc Drive
TP00825
C
B
A