User`s guide

User Guide
145
www.bull.com
5. Insert the drive into the 5.25-inch device drive bay (C).
6. Line up the holes in the optical disc drive with the holes in the chassis (D).
7. Move the latch to the “lock” position (E).
8. Connect the power (P3 or P4 connector from the power supply) and data cables
to the rear of the optical disc drive (F).
Figure 49: Installing an Optical Disc Drive
Note: For more information, see “Cabling IDE Devices”
on page 180.
9. If necessary, remove the filler plate from the front bezel assembly.
C
E
F
D
TP00695
TP01723